, using the ROCKLINIZING process, applies a hard and wear resistant surface of tungsten carbide, titanium carbide and ROCKHARD electrode material to repair metals, tools and dies.
The ROCKLINIZER electronically impregnates and deposits wear-resistant material both underneath and on top of metal surfaces.
Unlike welding or metal spraying, no appreciable heat is generated; and the electrode material will not separate or flake off
the workpiece. After ROCKLINIZING, no heat treatment, grinding or other surface treatment is necessary.
The end result of this surface treatment is to increase productivity and reduce costs. When the tools and dies remain in
operation without replacement due to wear, there will be less machine downtime, operator idle time, and expense of new or
resharpened tools and dies. These savings justify the purchase of the ROCKLINIZER.
CLICK HERE TO WATCH VIDEO
The Rocklinizer Carbide Application Process is now customized to provide the ultimate wear protection for knife and blade edges.
Tungsten carbide applied to one side of a sharpened blade provides a “self sharpening” edge akin to the Beaver Tooth effect in nature. The dentine wears away faster than the enamel as the Beaver’s lower jaw works against the upper jaw. This hard-soft differential hardness causes the knife edge to become more aggressive as it is used.
Many knife makers eliminate the need for heat treatment as softer metal blades can now be upgraded by applying the hard and wear resistant carbide surface to only one edge.
CLICK HERE TO FIND OUT MORE!
